How to fix “Permission to send an SMS has not been enabled for the region indicated” problem on Twilio?

Enable all countries or selected countries here.

https://www.twilio.com/console/sms/settings/geo-permissions

 

reference:

https://stackoverflow.com/questions/47423741/twilio-permission-to-send-sms-has-not-been-enabled-for-the-region-indicated/47424927

How to swap out google fonts for China users?

Currently a custom protocol is used, will create and release library soon!

Check out ajax.php , the method “get_visitor_country” and go through the flow. Create a library from this.

 

To use:

  1.  Find the google fonts that are used on the page.
  2. Download them using: https://google-webfonts-helper.herokuapp.com/
  3. You should open the link i.e. “https://fonts.googleapis.com/css?family=Source+Sans+Pro:300,400,600,700|Roboto:300,400,500,700&display=swap” to see what settings to download on the herokuapp page.
  4. Now create a new CSS file i.e. /static/china_fonts/vip_page.css
  5. On the herokuapp page, enter the path/folder name you will place the font files for that font (Customize folder prefix (optional):)  i.e. source_sans_pro/
  6. Create the folder in Step 5, i.e. /static/china_fonts/source_sans_pro
  7. Download the fonts.zip file from herokuapp page, and extract the font files into the folder in Step 6.
  8. Look for // <!– step 1: china google fonts –> in controllers/pages.php , load AJAX library
  9. Look for <!– step 2: china google fonts –>  in views/pages/say_that_you_love_me/en/php
  10. Look for <!– step 3: china google fonts –> to run the ajax message in the same file in Step 9.
  11. That’s it!

 

How to fix preparing automatic repair loop during Windows start after the latest Windows feature update?

Last updated: 20200730

Sidenote:

Our clients have scheduled backups that runs Macrium Reflect, so we can always restore their computer to a certain date should the computer ever crash or become unbootable – see: https://apps.badjoerichards.com/apps/developerhack/how-to-restore-a-macrium-reflect-backup-when-your-computer-is-unbootable-or-fail-to-boot-to-windows/

 

PROBLEM:

HOWEVER, the latest Windows feature update has caused multiple computers across the globe to fail to boot, and get caught in the preparing automatic repair loop – which fails to repair booting, and users can no longer boot and use their computer.

SOLUTION:

Head to your BIOS, and change the booting device to Windows Boot Manager that is hosted on the correct disk drive!

DIAGNOSED PROBLEM:

It seems the latest Windows Feature Update installs a new Windows Boot partition info into the WRONG drive, especially if you have multiple drives on your computer.

We’re unsure what algorithm the Windows update use to pick the drive, but clearly, it’s not working correctly, therefore installing Boot Manager into the wrong drive, and causing a failed boot and repair loop.

How install NSP games on Goldleaf safely to your hacked Nintendo Switch?

Best place to get and download NSPs: https://switch-xci.xyz/

 

Note that installing Sigpatches without using Fusee-primary.bin –> Atmosphere, can work for some titles.

 

But if you want all titles to work, you need to make Hekate boot Fusee-primary.bin –> Atmosphere.

Change that by editing hekate_ipl.bin –> Emummc –> fss0 line, replace it with: payload=<where your fusee-primary.bin> is.

(clearly we need to clean up this help doc later so it’s more idiot proof!)

 

 

Following the guide at:
https://www.cfwaifu.com/goldleaf-quark/    (20210426, skip to Launch Goldleaf part at the above page – hit R when running an app to start EDIZON, if you have installed all the apps before… install games to SD CARD)

If it hangs, make sure to UNCHECK ‘Read-only’ for  .NSP file – see:

https://github.com/XorTroll/Goldleaf/issues/476

 

For Goldleaf to install pirated games on EMUNAND, use SIGPATCHES for ATMOSPHERE:
https://github.com/XorTroll/Goldleaf/issues/340

 

Download latest for 10.0.4 Sigpatches https://drive.google.com/file/d/1goaT-drUUpCmo6yJn2lxa4-V3jX8_hyV:

Updated to 10.0.2, latest Atmosphere, and sigpatches. Games don’t open. from SwitchPirates

Then install into /atmosphere/exefs_patches and /kip_patches respectively, you should now be able to install games in Goldleaf.

also consider this comment:

I realize you’ve resolved your problem (YAY!!) but i did want to mention and place this here for others.
I had a similar problem a month ago. Updated Firmware, updated CFW and Sigpatches, but somegames wouldnt load, some would. I was able to resolve via booting into Maintenance Mode then exiting without doing anything.
I did have to reinstall a few games, ones I kept trying to launch when troubleshooting.
I feel like even though I put the updated Sigpatches in place, they never took until I ran Maintenance Mode and exited.

To get to Maintenance Mode: Power off. Hold both Vol + and Vol – and keep them held. Hold Power until it starts up then release KEEP VOLUMES HELD. Once its in maintenance mode, you can release Vol buttons. I then just held Power and shut back down.

 

When trying to connect Wifi safely, boot into SYS CFW, and use Wifi + 90DNS, if you are trying to transfer files over FTPD.

When launching Goldleaf, launch from emunand, and no wifi, and use USB-C cable.

 

Zadig available here:

https://zadig.akeo.ie/

 

Quark.jar comes with Goldleaf at:

https://github.com/XorTroll/Goldleaf/releases

How to enable Wifi Internet Sharing / Mobile Hotspot in Windows 10?

Search for “Mobile hotspot” on the taskbar and run the program.

If you have problems turning on, for whatever reason, maybe having disabled/deleted a network adapter, try the following:

  1. Head to Device Manager.
  2. Select View > Check “Show hidden devices”
  3. Now look for every “Microsoft Wi-Fi Direct Virtual Adapter”, and hit the Red X icon, to “Uninstall device”. Don’t worry, we’ll install them right back.
  4. After you have uninstalled all, in the same Device Manager window, select “Action > Scan for hardware changes”.
  5. This will install the new Virtual Adapters automatically.

You should now be able to enable Mobile Hotspot and configure accordingly.

 

You can now head to “Network Connections”, to rename the new “Virtual Adapter”.

 

Select the internet/ethernet/network, right click on it, properties > Sharing> Check “Allow other network users to connect through this computer’s internet connection > Select the Virtual Adapter.

How to fix Macbook Pro Retina trackpad/mousepad not working and unresponsive after waking from sleep mode?

It seems resetting the SMC that handles the current during sleep/wake function of your macbook pro retina might work.

*OR ELSE*

Try force touch click on it – then it becomes alive again without need to restart.

“The Force Touch trackpad lets you Force click by pressing on the trackpad and then applying more pressure.”

======

Hi dominic,

Thanks for your advise. It worked. Had a chat with apple support and solved it.

“…there’s a component on the computer known as the SMC which controls both the sleep/wake function,And the distribution of the battery’s power,Which would include the current shared with the trackpad and its click button,…..try resetting the SMC….To do this, we’ll need to power down the Mac….While the computer is OFF, we’ll hold down shift, control, option and the computer’s power button, all together for ten seconds……..IF you do this right, the computer SHOULD NOT turn on………And it should reset the SMC, which could fix the situation that you’ve been experiencing about the distribution of your computer’s current as it relates to the sleep/wake function and your trackpad click…..”

regards

dimitris

 

Reference:

https://discussions.apple.com/thread/8198267